Combination Belt and Fluid Bed Dryer System

Combination Belt and Fluid Bed Dryer System

Triple Pass Belt Dryer feeds into an auger which then takes the product to a Fluid Bed Dryer. Previously used for dried fruit powder and seeds. This unit is still in operation but available for immediate sale. This line was processing 100kg/hour from 60% moisture at the infeed to 10% moisture at the outfeed.

Jinling Drying Belt Dryer - machine is widely used for drying materials with good air permeability such as flakes, strips and granules. It is particularly suitable for materials that have high moisture content, but require low drying temperature, such as dehydrated vegetables, and herbal medicines.

ZLG Series Zinc Sulfate Fluid Bed Dryer - raw material is fed into the dryer through the feeding end and moves forward continuously under the force of vibration. Hot air passes through the fluid bed plate, effectively drying the damp raw material. The moisture-laden air is then exhausted through a cyclone separator, while the dried raw material is discharged from the discharge end.

This line requires a steam boiler as a heat source, the previous operation used a 500,000BTU boiler but a 400,000BTU boiler should be more than sufficient. The boiler plate in the photos is for reference only and it is not a part of the line being sold.