Goring Kerr DSP2 Metal Detector
Goring Kerr DSP2 Metal Detector
Description
Operates on the balance coil full loop detection system. Three equally spaced coils surround the aperture: one is the oscillator coil, the other two are the receiving coils. The oscillator produces an electromagnetic field. The receiving coils oppose each other, creating a zero net signal. A piece of metal entering the field changes the balance, causing an error signal. Aperture: 16″L x 18″W x 8.75″H Inclined conveyor: 94″L x 15″W, top end: 45″ from ground, bottom end: 5.5″ from ground. Last certified: 2016 Includes a Marathon 1/3 hp electric motor, a Boston gear motor, a Fabco-Air ‘The Pancake Line’ direct interchange air cylinder, and an Allen-Bradley on-off switch. Tested and working, but it presents the following fault codes: 1) battery low voltage, 2) oscillator out of balance. See photos. Digital manual available upon request.
Specifications
Manufacturer | Graseby Goring Kerr |
Model | DSP2 |
Condition | Used |
Stock Number | 2945 |
Dimensions (l x w x h) | 110" x 46" x 53" |
Includes manual | Yes |
Power | 230/460 V | 1.6/0.8 A | 60 Hz |
Location code | SH-R |
Length (in) | 110 |
Width (in) | 46 |
Height (in) | 53 |